6 How to Put a Belt on a Washing Machine | Answered By Expert

The washing machine is a crucial appliance that we rely on in our daily lives. It is designed to make our laundry work easier and more efficient. However, like any other appliance, a washing machine may encounter mechanical problems, and one of the most common problems is a broken or worn-out belt. If you have a broken or worn-out belt in your washing machine, you may wonder how to put a new belt on. In this article, we will guide you step by step on how to put a belt on a washing machine.

Introduction

A washing machine belt is a rubber band that connects the motor to the drum, allowing the drum to rotate during the wash cycle. Over time, the belt may become worn out or damaged, resulting in a malfunctioning washing machine. Replacing a washing machine belt is a straightforward procedure that can be completed in a few steps. This article will guide you on how to put a belt on a washing machine.

Safety Precautions

Before you start working on your washing machine, it is crucial to take the necessary safety precautions. Before replacing the washing machine belt, it’s important to turn off the machine and unplug it from the power source to avoid the risk of electric shock. Wear protective gloves and goggles to protect your hands and eyes from any potential injury.

Types of Washing Machine Belts

There are two main types of washing machine belts: the drive belt and the pump belt.

1.  The drive belt is responsible for connecting the motor to the drum of the washing machine.
2. The pump belt connects the motor to the pump. 

6 Steps How to Put a Belt on a Washing Machine

1. Tools Required

To put a belt on a washing machine, you will need the following tools:

• Replacement belt
• Screwdriver
• Wrench
• Pliers
• Rag

2. Removing the Old Belt

To remove the old belt, follow these steps:

1. Locate the belt at the bottom of the washing machine. It should be wrapped around the motor pulley and the drum pulley.
2. To access the belt on your washing machine, To remove the back panel of the washing machine, use a screwdriver to unscrew and remove the screws that hold it in place.
3. Pull the back panel away from the washing machine to expose the belt.
4. Use pliers to release the tension on the belt by pulling the motor away from the drum.Clearing the pulleys and motor will make it easier to remove the old belt. 
5. Slide the old belt off the pulleys.

3. Cleaning the Pulley and Motor

Before installing the new belt, it is essential to clean the pulleys and the motor. Before installing the new washing machine belt, it’s important to use a rag to clean any dirt that may have accumulated on the pulleys and the motor.

4. Installing the New Belt

To install the new belt, follow these steps:

1. Place the new belt on the motor pulley.
2. Stretch the belt over the drum pulley.
3. Pull the motor away from the drum to tighten the belt.
4. Ensure that the belt is aligned correctly on the pulleys.

5. Adjusting the Tension of the Belt

After installing the new belt, you may need to adjust the tension to ensure that the belt is not too loose or too tight. To adjust the tension, follow these steps:

1. To replace the washing machine belt, you will need to use a wrench to loosen the bolts that secure the motor in place.
2. Move the motor slightly to adjust the tension of the belt.
3. Use a wrench to tighten the bolts that hold the motor in place.

6. Testing the Belt

Before closing the back panel of the washing machine, test the belt to ensure that it is functioning correctly. Follow these steps:

1. Turn on the washing machine and let it run through a cycle.
2. Listen for any unusual noises that may indicate that the belt is not functioning correctly.
3. Observe the drum to ensure that it is rotating smoothly.

Common Washing Machine Belt Problems

Here are some common problems that you may encounter with your washing machine belt:

1. Worn-out belt: If the belt is worn-out, it may slip or break, causing the washing machine to malfunction.
2. Loose belt: If the belt is too loose, it may cause the drum to rotate unevenly or make loud noises.
3. Tight belt: If the belt is too tight, it may cause the motor to overheat or the belt to break.
4. Misaligned belt: If the belt is not aligned correctly on the pulleys, it may cause the drum to rotate unevenly or make loud noises.

Conclusion

Putting a new belt on a washing machine is a simple process that can be done in a few steps. However, it is essential to take the necessary safety precautions and identify the type of belt your washing machine uses to ensure that you buy the correct replacement belt. Follow the steps outlined in this article to put a belt on a washing machine and keep it functioning correctly.

Recommended Topics:

1. How To Deep Clean Your Front Loading Washing Machine
2. Washing Machine Cleaning Hack TikTok
3. How to clean a LG front load washer That smells

If you want to read all the laundry related articles, visit here. Visit here for the 10 best washing machine cleaner, visit homyclean for Products Review and buying guide.

FAQs

Author